Micro Rode NT1-AI
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Micro Rode NT1-AI

Disponible: En stock
230,000

Le kit de studio complet RØDE NT1-AI  contient tout ce dont vous avez besoin pour réaliser des enregistrements professionnels de qualité studio à domicile. Doté de notre interface audio AI-1, de l'inégalable microphone à condensateur à grande membrane NT1, d'un support antichoc SM6 et d'un câble XLR, c'est le parfait premier pas vers l'enregistrement.

 

Output Connection
3 Pin XLR. Balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)

Acoustic Principle
Pressure gradient

Active Electronics
JFET impedance converter with bipolar output buffer

Directional Pattern
Cardioid

Frequency Range
20Hz ~ 20kHz

Output Impendence
100Ω

Equivalent Noise
4.5 dBA SPL (as per IEC651)

Maximum Output
+8 dBu (1kHz, 1% THD into 1K Ω load)

Sensitivity
-29 dB re 1V/Pa (35mV @ 94dB SPL) ± 2dB @ 1kHz

Dynamic Range
128 dB SPL

Maximum SPL
132 dB SPL

Signal to Noise Ratio
90 dBA SPL (as per IEC651)

Power Requirements
24V phantom power 48V phantom power

Net Weight (grams)
395

Colour
Black

Diameter (millimetres)
50

Length (millimetres)
187

AI-1 Specifications

Computer Connectivity
USB

Form Factor
Desktop

Simultaneous I/O
1 x 2

Number of Preamps
1

Bit Depth
24-bit

Sample Rates
44.1 kHz 48 kHz 88.2 kHz 96kHz

Analog Inputs
1 x Neutrik XLR-1/4” combo

Analog Outputs
2 x 1/4” (impedance balanced) 1 x 1/4” (headphones)

Direct Monitor
Yes

USB
1 x USB Type C

Bus Powered
Yes

OS Requirements
Mac OS 10.10 or later Windows 7 or later

Power
USB bus-powered

Net Weight (grams)
560

Height x Width x Depth (millimetres)
38 x 124 x 100

Le kit de studio complet RØDE NT1-AI  contient tout ce dont vous avez besoin pour réaliser des enregistrements professionnels de qualité studio à domicile. Doté de notre interface audio AI-1, de l'inégalable microphone à condensateur à grande membrane NT1, d'un support antichoc SM6 et d'un câble XLR, c'est le parfait premier pas vers l'enregistrement.

 

Output Connection 3 Pin XLR. Balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
Acoustic Principle Pressure gradient
Active Electronics JFET impedance converter with bipolar output buffer
Directional Pattern Cardioid
Frequency Range 20Hz ~ 20kHz
Output Impendence 100Ω
Equivalent Noise 4.5 dBA SPL (as per IEC651)
Maximum Output +8 dBu (1kHz, 1% THD into 1K Ω load)
Sensitivity -29 dB re 1V/Pa (35mV @ 94dB SPL) ± 2dB @ 1kHz
Dynamic Range 128 dB SPL
Maximum SPL 132 dB SPL
Signal to Noise Ratio 90 dBA SPL (as per IEC651)
Power Requirements 24V phantom power 48V phantom power
Net Weight (grams) 395
Colour Black
Diameter (millimetres) 50
Length (millimetres) 187

AI-1 Specifications

Computer Connectivity USB
Form Factor Desktop
Simultaneous I/O 1 x 2
Number of Preamps 1
Bit Depth 24-bit
Sample Rates 44.1 kHz 48 kHz 88.2 kHz 96kHz
Analog Inputs 1 x Neutrik XLR-1/4” combo
Analog Outputs 2 x 1/4” (impedance balanced) 1 x 1/4” (headphones)
Direct Monitor Yes
USB 1 x USB Type C
Bus Powered Yes
OS Requirements Mac OS 10.10 or later Windows 7 or later
Power USB bus-powered
Net Weight (grams) 560
Height x Width x Depth (millimetres) 38 x 124 x 100

Avis des clients

Based on 1 review Rédiger un avis
  • 99% Retour
    Clients
  • 365 jours
    de Garantie
  • Système de payement
    Sécurisé
  • Uniquement les
    Meilleures Marques